Brother Printer Dcpl2524dw Reboots to Blinking Blue Rectangles Screen

What do the indicator lights mean?

The indicators light and blink to indicate the printer's status.  The following symbols are used in this FAQ to explain the meaning of the different indicator colors and patterns.

Power LED	Condition	Solution
	The printer is connected via Bluetooth®. The tape is feeding. The tape is cutting. Printing	-
(Once every 0.5 sec.)	The unit is receiving data from your smartphone, tablet or computer. Transferring program	-
(Lit for 3 sec. -> Off for 1 sec.)	Ready	For Android™ users : If the LED light flashes in green even after the connection between the printer and the mobile device is completed, check the following. Does the LED light flash while the printer and the mobile device are connected? ->The LED light stops blinking and remains lit when printing starts. Is the printer and the mobile device connected correctly? ->To see how to connect the printer and the mobile device, refer to the FAQ: "How can I connect my mobile device to the printer? (P-touch Design&Print / Design&Print 2)".
	Initializing mode	-
(Once every 0.5 sec.)	Cooling mode	-
(2 times in 1 sec. → Off for 1 sec.)	Li-ion battery error	Press the power button. Make sure the insulation sheet has been removed and charge the Li-ion battery. For details for charging the battery, see the FAQ: "How do I charge the Li-ion battery?". If the problem still occurs, change the Li-ion battery to a new one.
(Once every 1 sec.)	Li-ion batteries are almost out of power.	Press the power button. Make sure the insulation sheet has been removed and charge the Li-ion battery. For details for charging the battery, see the FAQ: "How do I charge the Li-ion battery?".
	No tape error Wrong tape error Non-compliant tape error	Press the power button. Install a compatible tape cassette.
	High temperature error	Press the power button. The LED light starts flashing in orange once every 0.5 seconds and the printer enters the Cooling mode. Wait until the LED light starts flashing in green. Make sure the LED light is flashing in green and the printer is ready, and then try to print again.
	Communication error	Turn off the printer and then turn it on again. For mobile device: Connect to the printer via Bluetooth. For details, see the FAQ: "How can I connect my mobile device to the printer? (P-touch Design&Print / Design&Print 2)". For computer: Disconnect the USB device and connect it again or change the USB port. For details, see the FAQ: "How do I connect the printer to my computer using a USB cable?".
	Cutter error	Turn off the printer and then turn it on again. For details, see the FAQ: "The printer stops printing, the power LED blinks in red, and my mobile device displays an error message.".
	Program Transfer error	Transfer the program again. If the problem still occurs, contact Brother Customer Service.
(Once every 0.3 sec.)	System error	Contact Brother Customer Service. The flashing pattern of the LED light may change by pressing the power button. To resolove this issue, contact Brother Customer Service.

Battery LED	Condition	Solution
	Charging complete	-
	Charging	-
(Off for 3 sec. -> Lit for 0.5 sec.)	Li-ion battery power: half	-
(Off for 2 sec. -> Flash for 2 times.)	Li-ion battery power: low	-
(Once every 0.5 sec.)	Li-ion batteries are almost out of power. Li-ion battery error	Press the power button. Make sure the insulation sheet has been removed and charge the Li-ion battery. For details for charging the battery, see the FAQ: "How do I charge the Li-ion battery?". If the problem still occurs, change the Li-ion battery to a new one.

Content Feedback

To help us improve our support, please provide your feedback below.

meldrumquirs1950.blogspot.com

Source: https://support.brother.com/g/b/faqend.aspx?c=sg&lang=en&prod=p710bteas&faqid=faqp00001466_025

Share this post